JH5050 4/20mA CURRENT ISOLATOR
DIN-RAIL MOUNT

 

    • Fully Isolates 4/20mA Process Loop Currents
    • Full 5000 Series Accuracy, Lower Cost
    • Quick-Check Red/Green Output LEDs
    • DIN-Rail Mount, 1 Inch Wide
    • Unpluggable Terminal Strip
    • AC or DC Power Options

    JH5050
    PDF
    DATA SHEET

    JH5050
    PDF
    MANUAL

The Model JH5050 4/20mA Current Isolator uses the same high-accuracy circuitry as our other 5000 Series Transmitters. The popularity of this range allows us to reduce costs by premanufacturing and stocking this version. For other ranges and a complete selection of options, please refer to the rest of our 5000 Series product line.

Red-green Quick-Check LEDs give a quick indication of the relative output. Red is brighter at the low end, green at high, while at mid-scale both are approximately equal. Red-only indicates offscale low while green-only indicates offscale high.

AC and DC power choices are available.

ORDERING INFORMATION

Model Number:  Specify Model JH5050A for AC power, JH5050D for DC power.
Input Range:  4/20mAdc only.
Output Range:  4/20mAdc only.
Power:  Specify 115Vac, 230Vac, 12Vdc or 24Vdc.

INSTALLATION AND CONNECTIONS

Model JH5050 snaps onto 35mm DIN rail. Connections are made to the front-panel terminals. The terminal strip unplugs to facilitate calibrating or replacing the transmitter.

Connections to the 8 terminals (top to bottom) are:
    1:  Input plus.
    2: 
Input minus.
    3:
  No connection.
    4: 
No connection.
    5:
  Output plus.
    6: 
Output minus.
    7: 
Power (AC or, if DC power option, DC plus).
    8: 
Power (AC or, if DC power option, DC minus).

DETAILED SPECIFICATIONS

Input Range:  4/20mAdc. (62 ohms input resistance - 1.25V drop at full scale.)
Output Range:  4/20mAdc. Output drive capability, 24V (1,200 ohms max. at 20mA output).
Accuracy (factory calibration) +/-0.1% of span.
Adjustability:  Zero and span each are adjustable approx. +/-15% of span.
Linearity:  +/-0.05% of span or better.
Response Time:  Under 100 milliseconds.
Isolation:  3-way (Power/Input/Output) 1,500Vac rms (2,100V peak).
Guaranteed Operating Temperature:  -10 to +60 deg. C (14 to 140 deg. F).
Temperature Stability:  +/-0.02% of span per deg. C, or better.
Power Requirements:  AC, 115 or 230Vrms, 50/60Hz, 2.5V-A. DC, 12 or 24V, 2.5W.